News Archive
ATK and United Launch Alliance Successfully Test GEM-60 Motor
Arlington, Va., May 31, 2012 – ATK (NYSE: ATK) and United Launch Alliance (ULA) conducted a successful cold-temperature ground test today of a Graphite Epoxy Motor (GEM-60) solid rocket motor used to boost ULA Delta IV launch vehicles.
The main test objectives from today’s static motor firing were measuring the rocket motor’s performance at cold temperatures, qualifying a new vectorable nozzle on the motor and verifying the performance of new nozzle insulation at the lowest range of operational temperatures. Additionally, the test provides qualification for transitioning nozzle manufacturing operations from an outside supplier to ATK.
“This motor firing is an important test for ATK, as we have expanded the use of our in-house capabilities.” said Scott Lehr, vice president and general manager, ATK Aerospace Group, Defense & Commercial Division. “By manufacturing the nozzles ourselves, we are able to provide a better value for our customers.”
The 60-inch motor is a reliable, low-cost propulsion system comprised of a composite case. The successful test is an important milestone in the GEM-60 vectorable nozzle qualification. Initial test data indicate that the 60-inch diameter and 53-feet long motor, which was chilled to a 30F core temperature, performed as designed, producing approximately 270,000 pounds of thrust and burned for 90 seconds.
“GEM-60 motors have successfully boosted ULA’s Delta IV Medium+ launch vehicles 11 times since 2002,” said Mark Wilkins, ULA’s vice president of Program Operations. “Ground tests are an important part of qualifying modifications and upgrades to flight hardware, as well as ensuring mission success on future flights.”
The GEM-60 motor is a strap-on booster that was developed for ULA by ATK in 2000 to increase the payload-to-orbit capability of the Delta IV Medium+ launch vehicles. The first two-motor configuration of the GEM-60 boosted the inaugural flight of the Delta IV launch vehicle family in November 2002, and the first four-motor configuration flew in 2009.
The next GEM-60 motor test is scheduled for September and will be a fixed nozzle test.
ATK is an aerospace, defense, and commercial products company with operations in 22 states, Puerto Rico, and internationally. News and information can be found on the Internet at www.atk.com.
ULA program management, engineering, test, and mission support functions are headquartered in Denver, Colo. Manufacturing, assembly and integration operations are located at Decatur, Ala., and Harlingen, Texas. Launch operations are located at Cape Canaveral AFS, Fla., and Vandenberg AFB, Calif.
For more information, visit the ULA Web site at www.ulalaunch.com, or call the ULA Launch Hotline at 1-877-ULA-4321 (852-4321). Join the conversation at www.facebook.com/ulalaunch and twitter.com/ulalaunch.
ATK and United Launch Alliance Successfully Test GEM-60 Motor
Arlington, Va., May 31, 2012 – ATK (NYSE: ATK) and United Launch Alliance (ULA) conducted a successful cold-temperature ground test today of a Graphite Epoxy Motor (GEM-60) solid rocket motor used to boost ULA Delta IV launch vehicles.
The main test objectives from today’s static motor firing were measuring the rocket motor’s performance at cold temperatures, qualifying a new vectorable nozzle on the motor and verifying the performance of new nozzle insulation at the lowest range of operational temperatures. Additionally, the test provides qualification for transitioning nozzle manufacturing operations from an outside supplier to ATK.
“This motor firing is an important test for ATK, as we have expanded the use of our in-house capabilities.” said Scott Lehr, vice president and general manager, ATK Aerospace Group, Defense & Commercial Division. “By manufacturing the nozzles ourselves, we are able to provide a better value for our customers.”
The 60-inch motor is a reliable, low-cost propulsion system comprised of a composite case. The successful test is an important milestone in the GEM-60 vectorable nozzle qualification. Initial test data indicate that the 60-inch diameter and 53-feet long motor, which was chilled to a 30F core temperature, performed as designed, producing approximately 270,000 pounds of thrust and burned for 90 seconds.
“GEM-60 motors have successfully boosted ULA’s Delta IV Medium+ launch vehicles 11 times since 2002,” said Mark Wilkins, ULA’s vice president of Program Operations. “Ground tests are an important part of qualifying modifications and upgrades to flight hardware, as well as ensuring mission success on future flights.”
The GEM-60 motor is a strap-on booster that was developed for ULA by ATK in 2000 to increase the payload-to-orbit capability of the Delta IV Medium+ launch vehicles. The first two-motor configuration of the GEM-60 boosted the inaugural flight of the Delta IV launch vehicle family in November 2002, and the first four-motor configuration flew in 2009.
The next GEM-60 motor test is scheduled for September and will be a fixed nozzle test.
ATK is an aerospace, defense, and commercial products company with operations in 22 states, Puerto Rico, and internationally. News and information can be found on the Internet at www.atk.com.
ULA program management, engineering, test, and mission support functions are headquartered in Denver, Colo. Manufacturing, assembly and integration operations are located at Decatur, Ala., and Harlingen, Texas. Launch operations are located at Cape Canaveral AFS, Fla., and Vandenberg AFB, Calif.
For more information, visit the ULA Web site at www.ulalaunch.com, or call the ULA Launch Hotline at 1-877-ULA-4321 (852-4321). Join the conversation at www.facebook.com/ulalaunch and twitter.com/ulalaunch.